When the Brother Machine malfunction due to any reason, a message 'Print Unable 70' or 'Machine Error 70' appears. Sometimes it's because of a paper jammed between the machine's rollers. If you face the same issue in your brother printer call brother printer technical support team.
2. Watch for the 'Ready' message displayed on the screen. It means the machine is back in working condition and the issue is sorted.
2. Open the back cover of the Brother printer.
3. Green tabs which are visible at both ends of the fuser cover, pull it towards you to fold the fuser down.
4. Look for any paper stuck in between the rollers.
5. Gently use both hands, to pull the jammed paper out of the fuser unit, if any. Now close the fuser cover and the back cover also.
6. Turn back the printer on, if it says 'Ready'. It means that the problem is fixed.
7. If the issue is still not resolved and 'Print Unable 70' message is still visible, in this scenario follow the next steps.
8. Turn off the printer again and open the front cover by pressing the release button.
9. Pull the green handle gently to get out the drum unit of the printer machine.
10. Press the green tab/lever to the opposite direction and gently remove the drum by lifting it.
11. Place the drum on a clean, flat surface, a paper or cloth underneath to avoid spilling the toner.
12. Now, have a good look inside the machine for any paper stuck or jammed.
13. Pull the stuck paper with both hands carefully.
14. Place back the drum unit carefully the same as it was removed from the printer machine.
15. Close the front cover of the printer.
16. Turn on the machine and check for 'Ready' message on the screen.
Call at Brother support number 1800-728-0810 if the issue is still not resolved. We Are Available 24/7 hour for our customers' help.
In such circumstances follow the below-mentioned steps to get your Brother printer in working condition.
1. Turn off the machine by pressing the power switch. Wait for 10-15 seconds and then turn the machine back on.2. Watch for the 'Ready' message displayed on the screen. It means the machine is back in working condition and the issue is sorted.
If the issue still persists, then follow these instructions.
1. Turn the machine and remove the power cord from the power socket.2. Open the back cover of the Brother printer.
3. Green tabs which are visible at both ends of the fuser cover, pull it towards you to fold the fuser down.
4. Look for any paper stuck in between the rollers.
5. Gently use both hands, to pull the jammed paper out of the fuser unit, if any. Now close the fuser cover and the back cover also.
6. Turn back the printer on, if it says 'Ready'. It means that the problem is fixed.
7. If the issue is still not resolved and 'Print Unable 70' message is still visible, in this scenario follow the next steps.
8. Turn off the printer again and open the front cover by pressing the release button.
9. Pull the green handle gently to get out the drum unit of the printer machine.
10. Press the green tab/lever to the opposite direction and gently remove the drum by lifting it.
11. Place the drum on a clean, flat surface, a paper or cloth underneath to avoid spilling the toner.
12. Now, have a good look inside the machine for any paper stuck or jammed.
13. Pull the stuck paper with both hands carefully.
14. Place back the drum unit carefully the same as it was removed from the printer machine.
15. Close the front cover of the printer.
16. Turn on the machine and check for 'Ready' message on the screen.
Call at Brother support number 1800-728-0810 if the issue is still not resolved. We Are Available 24/7 hour for our customers' help.
If you are searching for Used Automobile Parts Nearby you, then you connect to us. We are a certified and experienced automotive service provider and we have an end number of Used Car Parts For Sale You can get the best one for you. For further details , call us now.
ReplyDelete