When the Brother Machine malfunction due to any reason, a message 'Print Unable 70' or 'Machine Error 70' appears. Sometimes it's because of a paper jammed between the machine's rollers. If you face the same issue in your brother printer call brother printer technical support team. In such circumstances follow the below-mentioned steps to get your Brother printer in working condition. 1. Turn off the machine by pressing the power switch. Wait for 10-15 seconds and then turn the machine back on. 2. Watch for the 'Ready' message displayed on the screen. It means the machine is back in working condition and the issue is sorted. If the issue still persists, then follow these instructions. 1. Turn the machine and remove the power cord from the power socket. 2. Open the back cover of the Brother printer. 3. Green tabs which are visible at both ends of the fuser cover, pull it towards you to fold the fuser down. 4. Look for any paper stuck in betw
Sometimes printer seems to be working just fine but doesn't scan any document. In this sort of the situation, Call our Brother printer technical support team. But the First thing is please follow these simple steps. Try The Following Steps And Fix Your Brother Printer Issues 1. First of all, check your Brother printer if it is in working condition, i.e. not on sleep mode. Another thing is to check the little display screen for any error or a yellow triangleTurn it off, check that the power cable is attached properly and power supply is on. Restart it again and if it doesn't help then try the other options. 2. Check the network connection and for loose connection cable, if any, fix it and try to scan again. 3. For testing, click on Start button from your computer, open Control panel, Devices, and Printers left click on your default printer, Printer Properties and click on Print Test Page 4. Note down the IP Address of your printer device. This information is to be used